CORRUGATED GRAPHITE GASKET - CORRUGATED GRAPHITE GASKET
Maxigraph consists of a corrugated metallic core encapsulated by a graphite coating. It has been designed to seal on low load applications previously designed for Spiral Wound gaskets such as 150 and also 300lb lines. 

A robust and easy to handle gasket, the corrugations in the core develop high stress areas to produce a gasket with excellent gas-tightness at low bolt loads. 

Seals on low load applications. 
Available in a range of core materials – the standard being Stainless Steel 316 

KAMMPROFILE GASKET - KAMMPROFILE GASKET
Maxiprofile grooved, covered metal gaskets consist of a serrated metallic core with a soft facing material. The Maxiprofile style gasket is mainly used in vessel applications where often the gasket width is limited. Maxiprofiles are also often used as an upgrade on applications currently using metal jacketed gaskets due to the improved leaktightness, ease of installation and the possibility of reuse.

The depth and profile of the groove is specially design to facilitate densification of the facing material and create a very leaktight seal with low gasket stresses.

Maxiprofile gaskets are often used in heat exchangers and can be manufactured with many bar configurations. Maxiprofile gasket cores can also be refurbished and reused.
Low sealing stress required for installation.
Suitable for a range of chemicals.
Suitable for use in high pressure and high temperature applications.
Can be refurbished and reused.
Can be manufactured to suit standard flange applications and vessels.
Can be manufactured for use with narrow flanges.

METAL JACKETED GASKETS - METAL JACKETED GASKETS
The most basic type of semi-metallic gasket has a compressible insert enclosed within metallic jacket. The insert material forces the metal to deform to suit the flange surface and effect a seal. 

Metal jacketed gaskets are commonly used in heat exchangers though are often replaced by Maxiprofile style gaskets. Metal jacketed gaskets can be manufactured with a number of metals and high temperature filers. 

Economical

Can be manufactured to suit narrow flanges 
Range of materials available 

RINGTYPE JOINTS (RTJ) - RINGTYPE JOINTS (RTJ)
RTJs are designed to be used in high pressure applications and can be manufactured from a number of materials to suit the process media and the flange materials.

RTJs are precision machined metallic rings which are designed to be used with API 6B, ASME B16.5 and API 6BX (dependent on the gasket style) flanges. RTJs are often used in offshore applications and certain styles can be adapted for subsea installation.

Klinger hold a large range of RTJs in stock in a number of profiles and materials.

Can be used for high pressures.
Wide range of materials available.

Available ring joint styles, designed for specific flange types:
Style R Oval
Style R Octagonal
Style RX
Style BX

SENTRY DR - SENTRY DR
A safe, high integrity seal that provides operators with the ability to test the integrity of a clamped connection. The Sentry DR helps reduce the requirement of large volumes of Nitrogen or other test medias and reduce down time signifcantly, whilst maximising plant up time, effciency and safety when carrying out integrity and pressure tests. 

SENTRY DS - SENTRY DS
A safe, high integrity seal that provides operators with the ability to test the integrity of a bolted connection. The Sentry helps reduce the need to involve large volumes of nitrogen and reduce down time whilst performing integrity and pressure tests, maximising plant up time and efficiency. Designed to suit raised face ASME B16.5 flanges from Class 150 to Class 2500. 

SENTRY IK - SENTRY IK
A safe, high integrity seal that provides operators with the ability to test the integrity of a bolted connection. The Sentry IK helps reduce the requirement of large volumes of Nitrogen or other test medias and reduce down time significantly, whilst maximising plant up time, efficiency and safety when carrying out bolted connection integrity and pressure tests. 

Specidically designed for applications where cathodic isolation is required or mitigation against galvanic corrosion combined with providing users the benefit of being able to install a gasket and test the integrity of the connection in the same operation. 

SENTRY RTJ - SENTRY RTJ
The Sentry can be used in both ring joint and raised face flanges. The Sentry metallic ring joint gaskets are heavy duty, high-pressure gaskets largely used in offshore petrochemical applications. 

Ring Type Joints (RTJ) are precision engineered components designed to be used in conjunction with precision-machined flanges. The ring gasket is located within annular recesses in the opposing faces of the flanges. The ring gasket is compressed into the groove and the angled sealing faces deform to match the grooves and create a seal. The pressure classes and geometries of the gaskets and flanges are given in the standards API 6A, ASME B16.20 and ASME B16.5. 

Spiral Wound Gasket - MAXIFLEX SPIRAL WOUND GASKET
Spiral wound gaskets combine the ease of sealing of a graphite, PTFE or mica filler with the strength afforded by a specially profiled metallic, spring-like reinforcement. The sealing element is manufactured by interleaving plies of alternating metallic winding strip and filler to create a gasket that is robust and easy to install. 

Spiral wound gaskets can be manufactured from a wide range of metals to resist against chemical attack and temperature related degradation and used in combination with either graphite, PTFE or mica filler. 

Creates a very leaktight, reliable seal. 
Suitable for high temperatures and pressures. 
Can be manufactured to suit standard flanges and also custom-designed vessels.